Product Category
General LV frequency converter for floors
3、General LV frequency converter for floors
uproduct description
The ground high-voltage frequency converter produced by our company adopts unit series high-voltage frequency conversion technology. It is specially designed for permanent magnet motors. It has good matching with permanent magnet synchronous frequency conversion motors. It adopts vector control to achieve precise torque control. At the same time, the frequency converter It has the characteristics of high efficiency, superior electromagnetic compatibility, and strong environmental adaptability, effectively reducing the interference to the power grid and surrounding equipment.
uScope of application
It is widely used in belt conveyors, hoists, mills, fans, water pumps and other occasions. This type of frequency converter is also suitable for all kinds of asynchronous motors.
uMain technical features:
1) Adopt power unit cascade type technology route unit series connection, multi-level output.
2) Using vector control high-voltage inverter, the control core is composed of DSP+ARM+FPGA, instructions are completed in nanoseconds, and the control waveform and inverter waveform can be verified in real time
3) The high-voltage inverter has a unique flux closed-loop vector control technology, which is the best control algorithm in the field of high-voltage inverters. It has been improved according to the inherent characteristics of the high-voltage synchronous machine. On the basis of maintaining high dynamic performance, it overcomes The influence of rotor resistance and inductance parameters on the performance of the speed control system is discussed.
4) The unit cascade mode is adopted. When one of the units fails, if the unit is equipped with a bypass function, the asymmetric bypass technology can make the system run without stopping. Asymmetric technology can achieve a higher voltage output amplitude than traditional bypass schemes.
5) With the speed start function, it can start the inverter under the condition of unknown motor rotation speed. The inverter can automatically quickly identify the motor speed, output the corresponding frequency, and control the motor to rotate to the specified frequency. This technology can effectively reduce the impact of instant power outages on production Impact on the power grid. Compared with the traditional speed start technology, the time is reduced by 90%.
6) High and low voltage ride-through function: When the power grid drops or fluctuates instantly, the system can ensure that the instantaneous power failure will not trip, and the inverter operation will not be affected within 5 cycles after the power failure, and the inverter will automatically derate after 5 cycles. The inverter will stop after the power loss exceeds 9s, and continuous production can improve the production efficiency of the system.
7) The modular design of the power unit adopts specially designed special tooling for maintenance, which can realize the complete replacement and re-operation of the unit within 30 minutes, and the unit control board can realize the replacement of the unit without disassembling, and the integrated design of unit bypass, no need to change the unit Maintenance can be achieved by disassembly and assembly.
uModel Description
The models of ground universal inverters are as follows:
uProduct Selection Table
|
sequence number |
Inverter power（KVA） |
6KV |
10KV |
Adapted motor power (kW) (Heavy load occasions) |
|
1 |
315 |
BP-315/6KV |
BP-315/10KV |
200 |
|
2 |
355 |
BP-355/6KV |
BP-355/10KV |
220 |
|
3 |
400 |
BP-400/6KV |
BP-400/10KV |
250 |
|
4 |
450 |
BP-450/6KV |
BP-450/10KV |
288 |
|
6 |
500 |
BP-500/6KV |
BP-500/10KV |
315 |
|
7 |
560 |
BP-560/6KV |
BP-560/10KV |
355 |
|
8 |
630 |
BP-630/6KV |
BP-630/10KV |
400 |
|
9 |
710 |
BP-710/6KV |
BP-710/10KV |
450 |
|
10 |
800 |
BP-800/6KV |
BP-800/10KV |
500 |
|
11 |
900 |
BP-900/6KV |
BP-900/10KV |
560 |
|
12 |
1000 |
BP-1000/6KV |
BP-1000/10KV |
630 |
|
13 |
1120 |
BP-1120/6KV |
BP-1120/10KV |
710 |
|
14 |
1250 |
BP-1250/6KV |
BP-1250/10KV |
800 |
|
15 |
1400 |
BP-1400/6KV |
BP-1400/10KV |
900 |
|
16 |
1600 |
BP-1600/6KV |
BP-1600/10KV |
1000 |
|
17 |
1800 |
BP-1800/6KV |
BP-1800/10KV |
1150 |
|
18 |
2000 |
BP-2000/6KV |
BP-2000/10KV |
1250 |
|
19 |
2250 |
BP-2250/6KV |
BP-2250/10KV |
1400 |
|
20 |
2500 |
BP-2500/6KV |
BP-2500/10KV |
1600 |
Contact Us
Shanghai JNG Industry Co., Ltd. (Headquarters)
Address: 26F and 27F, Building No. 1, Oasis Middle Ring, No. 1628, Jinshajiang Road, Shanghai
Postcode: 200333
Switchboard: 86-21-51806888
Fax: 86-21-31210055
After-sales Phone：4000797000
联系我们
JNG Technology Co., Ltd. (Production Base)
Address: No. 899, Kaixi Road, Jiaxing
Phone:86-573-83700000
Email：shkf@shjingji.com (After-sales Service Department)
Website：www.shjingji.com
Scan and follow the QR code
COPYRIGHT © JNG Technology Co., Ltd. 浙ICP备18032782号-1
Powered by 300.cn
